Face Fit Train the Tester in Ilkeston, Derbyshire (Classroom)
Share this course with friends and followers on social media.
Face Fit Train the Tester Course in Ilkeston, Derbyshire
This Face Fit Train the Tester course will provide those who require it, the knowledge of how to conduct face fit testing using the Qualitative method. If you provide respiratory protective equipment (RPE) to your employees, or are responsible for Health and Safety within your organisation, then it is essential that fit testing is carried out correctly and documentary evidence is recorded to demonstrate the RPE is suitable for the wearer and has passed a fit test.
Please note: even though these training courses are sometimes referred to as "train the trainer" they are only to provide training to allow the attendees to conduct Qualitative face fit testing, not to enable them to teach the subject themselves.
All courses are delivered by a Fit2Fit accredited tutor.
Delivery Method
Delivered in a classroom in Ilkeston, Derbyshire, DE7 8JF
Course Duration
Half-day
Course Overview
INDG 479 recommends that RPE Fit Testing should only be conducted by a trained and competent person. To be competent, the fit test operator should have adequate knowledge and have received adequate instruction and training.
Recent research indicates that up to 50% of all RPE used does not offer the wearer the level of protection assumed and one of the major reasons is that it simply does not fit! Yet, under the regulations RPE must be correctly selected and this includes, for many types of RPE, a face piece Fit Test conducted by a trained and competent person.
Is Face Fit Testing a Legal Requirement?
Yes, face fit testing is a legal requirement under various health and safety regulations. The Health and Safety Executive (HSE) guidance notes INDG 479 and HSG53 specify that if you provide Respiratory Protective Equipment (RPE) to your employees, you must ensure that it fits correctly. This involves conducting a face fit test, carried out by a trained and competent person, to demonstrate that the RPE is suitable for the wearer. Proper documentation of the fit test is essential to comply with these regulations and to ensure that the RPE provides the intended level of protection.
What is Face Fit Testing?
Face fit testing is a method used to ensure that a respirator or mask fits the wearer correctly and provides the necessary level of protection. It involves a series of tests conducted by a trained and competent person to check the seal between the face and the respiratory protective equipment (RPE). The test ensures that the RPE is suitable for the individual wearer and can effectively prevent exposure to hazardous substances. This process includes both qualitative and quantitative methods, with the qualitative method being commonly used for half-face masks. Proper face fit testing is crucial to ensure compliance with health and safety regulations and to maintain a safe working environment.
Why Perform a Fit Test?
If you provide respiratory protective equipment (RPE) to your employees then it is essential that you have documentary evidence to show the RPE fits the wearer. By subjecting each wearer to a face-fit test you can be sure that your organisation is fulfilling the requirements laid out in the Health & Safety Executives (HSE) guidance notes INDG 479 & HSG53.
Do I Need to be Clean Shaven for a Face Fit Test?
Yes, it is essential to be clean shaven for a face fit test. Any hair growth between the skin and the face piece sealing surface, such as stubble, a beard, or a moustache, can prevent the mask from fitting properly and compromise the effectiveness of the respiratory protective equipment (RPE). To ensure an accurate and reliable fit test, attendees must be clean shaven on the day of the test. This requirement helps guarantee that the RPE will provide the intended level of protection for the wearer.
How Often Should Face Fit Testing be Done According to HSE
According to the Health and Safety Executive (HSE) guidelines, face fit testing should be conducted whenever a new type of tight-fitting respiratory protective equipment (RPE) is issued, or if there are significant changes to the wearer’s facial characteristics or the RPE itself. It is also recommended to conduct re-testing at regular intervals, typically every two years, to ensure continued effectiveness. Additionally, re-testing should be performed if there are any changes that could affect the fit of the mask, such as significant weight loss or dental work. Regular face fit testing helps ensure ongoing compliance with health and safety regulations and maintains the protective efficacy of the RPE.
Course Content
This course is for trainees who want to undertake their own face fit testing programme.
The training includes:
- Background to Face Fit Testing
- Legislation and Guidance, INDG 479
- Set-up of Equipment
- The Sensitivity Test
- Fit Test Protocols
- Pass Levels
- Practical face fit testing
- Troubleshooting & Problem Solving
- Fit Test Failures and Re-Tests
- Planning & Managing a Fit Testing Program
Please note: that RPE should be selected, maintained and used by trained and competent people, it is the employers responsibility to ensure compliance with this.
Entry Requirements
A good level of written and spoken English is required.
Persons attending MUST be clean shaven. The fit test section of the course cannot be carried out if there is any hair growth between the skin and the face piece sealing surface e.g. stubble beard growth, beard, moustache etc.
The wearer should not eat, drink (except plain water), smoke or chew gum for at least 30 minutes before the test.
The trainer will have a selection of masks (P1, P2, P3) with him on the day; however, if there is a specific type of mask you use then please let us know in advance and bring this with you on the day.
Fit Testing Kit
We can provide a full face fit testing kit at an additional cost of £200+Vat. Please ensure you have ordered this from your account manager if you require a kit.
Learner Numbers
In order to ensure the interaction between the delegates and the tutor is spread evenly and effectively, the maximum number of delegates allowed on a course is six.
Certification
ESS Certificate
Related Content
For short courses a completion certificate is available at the end of the course. You can screenshot this or print it out to confirm completion of the training.
For accredited courses a certificate will be sent directly to you from the appropriate awarding body.
All you need to complete our e-learning courses is a computer, tablet or smartphone and an internet connection.
E-learning and Online (Instructor-led) training is more flexible, efficient, and cost-effective.
Short online courses also help employers to demonstrate that they have fulfilled their legal duties to ensure their personnel have been adequately trained.
You will instantly receive a confirmation email with your order details and your course joining instructions will follow within one business working day.
Please note that course bookings can not be processed outside of normal working hours, over weekends or on bank holidays and will be processed the next business working day.
Step 1
Click the 'Buy' or 'Add to cart' button and you will be taken to our payment/booking page where you can choose to pay online now using a debit/credit card or you can pay later by invoice.
Step 2
Once you have paid for your course(s), you will receive an email from our team advising how to begin your training.
Step 3
You will be provided with a username and password which will enable you to access the e-learning portal. Login to start your course, once you have completed and passed the course, you will be able to download and print your certificate straight away.
We are an award winning education provider specialising in construction training. Join us to experience excellence in education and advance your career in the dynamic world of construction.
We deliver a wide range of construction training and NVQ qualifications to the construction industry, offering ‘in-house’ training which is certified and approved by Essential Site Skills to nationally recognised and accredited courses such as Fit2Fit, UKATA, CPCS, NPORS, CSCS, Edexcel, CSkills Awards, NOCN, Qualsafe Awards, IOSH, EUSR and CITB Courses to include; TWCTC, TWSTC, SMSTS, SSSTS, SEATS and HSA.
Our team of trainers are not only engaging and knowledgeable, but are also qualified to an extremely high standard in each subject they teach along with the methods of training they use.
Envico is working in association with Essential Site Skills offering training and is not accredited by or associated with Essential Site Skills or any other examination bodies, awarding bodies, institutions or organisations in any way whatsoever.