IATP Non-Licensed Asbestos Removal Training (Cat B) in Sheffield, South Yorkshire (Classroom)
Share this course with friends and followers on social media.
IATP Non-Licensed Asbestos Removal Training (Cat B) Course in Sheffield, South Yorkshire
This Non-Licensed Asbestos Removal Training (Cat B) provides delegates with both practical and theoretical knowledge to undertake asbestos Non Licensed works in accordance with; Control of Asbestos Regulations 2012.
What type of asbestos work does the NATAS Non-Licensed training allow you to do?
Upon completion of the 1-Day Non-Licensed asbestos training with NATAS, you will be certified to work with and remove non-Licensed asbestos products for 12 months.
In order to continue working with asbestos non-licensed materials, after the 12 months candidates must complete a half-day refresher course or a NATAS Asbestos Works Online Refresher eLearning course, as long as the initial training or annual refresher has been within the last 12 months.
Below are some examples of the type of work that this Non-Licensed Training Course will allow you to undertake.
What will I learn on this Non-licensed Asbestos Works Course?
This 1-day course will teach you:
- What to do if you discover or accidentally disturb asbestos during your work
- Using a class-H vacuum cleaner for asbestos
- Wetting asbestos materials to reduce airborne fibres
- Personal protective equipment (including RPE & PPE)
- Personal decontamination procedures
- Asbestos Waste disposal and using asbestos waste bags
- Using damp rags to clean surfaces of minor asbestos contamination
- Emergency procedures
- Cleaning up loose asbestos debris (small quantities)
- Control Limits and short duration work
- Legislation and Asbestos Awareness introduction
There is also a practical module in which we train candidates safe drilling, removal, repair, sealing & painting techniques for various Non-Licensed Asbestos containing material.
Examples of non-licensed work with asbestos
- Cleaning up small quantities of loose debris containing asbestos containing material dust (where the work is sporadic and of low intensity, the control limit will not be exceeded and it is short duration work)
- Drilling of textured decorative coatings, for fittings and fixing, light fittings, smoke alarms, air conditioning units/grills
- Encapsulation and sealing asbestos-containing materials that are in good condition.
Non-Licensed training will also allow you to maintain the following:
- asbestos cement products such as cement roof sheeting.
- asbestos-containing thermoplastic and vinyl floor tiles, bitumen roof felt, shingles, damp-proofing coatings, and mastics
- asbestos containing felt and paper
- plastic paint coatings, PVC floors, panels and sealing compounds
- asbestos-containing conveyor belts/drive belts, bonded rubber, electric cables
- resin-based ACMs such as friction products (eg brake linings)
- Painting/repainting asbestos insulating board (AIB) that is in good condition
- Asbestos pipe gaskets (including removal as part of repair and upkeep of equipment) if this can be done without substantial breakage – particularly useful for the oil & gas industry.
- Asbestos rope cords, ropes, yarns and cloth
Non-Licensed training will also allow you to remove the following products
- asbestos cement products (Undamaged) (eg roof sheeting and rainwater goods)
- small areas of textured decorative coatings using suitable dust-reducing methods, to support other activities such as installation/replacement of smoke alarms and light fittings
- textured decorative coatings provided that this can be done without deterioration of the material, (eg if the backing board is carefully cut around to achieve virtually intact removal)
- loosely fixed asbestos insulating board (AIB) panels to gain access to areas for other maintenance activities (eg under a bath to carry out pipework maintenance, or for access to a ceiling void for repair of lighting). This also includes re-attaching the panels after the work is done
- an AIB door with asbestos fireproofing
Non-Licensed training will also allow to do the following short duration work:
- repair minor damage to AIB
- involving drilling holes in AIB (eg when installing shelving)
Other work that can be undertaken:
- Working on other materials containing asbestos (such as paints, bitumen, resins, rubber, etc) where the fibres are bound in a matrix which prevents most of them being released (this includes, typically, aged/weathered AC)
- associated with collecting and analysing samples to identify the presence of asbestos
Who is this course for?
This course is suitable for demolition & construction workers, engineers, plumbers, shop-fitters, gas & heating installation, roofers, electrical workers or general maintenance and repair staff whose work will knowingly disturb low-risk asbestos-containing materials.
Many of our attendees are in the trade industry, they opt to undertake this training so they are able to fulfil their client’s requirements from housing associations, local councils, estate agents and various maintenance contracts they may be currently working on, instead of having to sub contract any asbestos work out to other Non-Licensed workers.
Not only do we have trades people attending but also this is also a popular course for maintenance or heating engineers and installers and many construction & demolition workers who regularly work with or have a requirement to handle/remove asbestos containing materials on site.
Our training is provided by experts in asbestos removal
Our expert trainer has successfully trained thousands of non-licensed workers in various roles and responsibilities.
Pre-Course Requisites
There are no pre-course requisites. Candidates can attend this course with no previous asbestos training.
Outcome/Qualification
IATP Recognised Non-Licensed Asbestos Works Training certificate. Valid for 1 year.
Refresher Training
Refresher training must be completed annually. Refresher training can be taken as classroom training or by our Non-Licensed e-learning refresher course (CBT) This must be completed within 12 months of your initial or refresher training.
Course Duration
1 Day
Delivery Method
Classroom training in Sheffield, South Yorkshire
Related Content
For short courses a completion certificate is available at the end of the course. You can screenshot this or print it out to confirm completion of the training.
For accredited courses a certificate will be emailed to you.
All you need to complete our e-learning courses is a computer, tablet or smartphone and an internet connection.
- Award winning online Training
- Winners of the RoSPA Safety Excellence Award
- Train Today, Certified Today!
- 360Certified high-quality courses
- Accessible 24/7 from your computer, laptop, phone or tablet device.
- Phone and online support from our qualified team
- Includes audio to follow along with the course content; great for Audio Visual (AV) learning.
- Useful NATAS Learning Management Admin System, with course credits for managing multiple persons’ online training requirements.
- Track progress, download certificates and send reminders.
- Easy course sign-up for individual students.
- Login to your account for your full history of certifications.
- Gain your industry-recognised certificate - Available to download instantly as a PDF and printable.
You will instantly receive a confirmation email with your order details and your course login details will follow within one business working day.
Please note that course bookings can not be processed outside of normal working hours, over weekends or on bank holidays and will be processed the next business working day.
Step 1
Click the 'Buy' or 'Add to cart' button and you will be taken to our payment/booking page where you can choose to pay online now using a debit/credit card or you can pay later by invoice.
Step 2
Once you have paid for your course(s), you will receive an email from our team advising how to begin your training.
Step 3
You will be provided with a username and password which will enable you to access the e-learning portal. Login to start your course, once you have completed and passed the course, you will be able to download and print your certificate straight away.
We are NATAS, the national asbestos awareness training accreditation scheme. We specialise in a wide range of courses and topics, including asbestos awareness training online, consultancy, BOHS courses, CITB courses, project management, health and safety e-learning, face to face and virtual learning.
Envico is working in partnership with NATAS offering NATAS training and is not accredited by or associated with NATAS or any other examination bodies, awarding bodies, institutions or organisations in any way whatsoever.